Lighting

Perfect reproductions right hand MK1 tail light, complete with lenses, chrome base and gaskets

R/H rear tail lamp assembly for MK2/3 cars. Supplied with lamp to body sealing rubber

L/H rear tail lamp assembly for MK2/3 cars. Supplied with lamp to body sealing rubber

A high-quality reproduction of the MK1 interior lamp, with black switch. See LB254 for spare bulb

Interior lamp cover MK1-MK3. Fitted to cars from 1959 - 1974. Has more of a domed top than the later MK4 type

Courtesy lamp cover for EAM1650

Indicator lamp bulb holder - Export spec. Takes double filament bulb for side lamp & indicators, as used on NZ assembled cars

Rear tail lamp lens L/H MK2/3

Rear tail lamp lens R/H MK2/3

Indicator lamp bulb holder - Euro spec. Takes single filament bulb for indicators only. See 27H5545 for double filament side lamp/indicator version

Foam gasket to fit MK2/3 tail lamp lenses. Fits left or right hand lamp. Sold singly

Clear front indicator lens in glass, see 37H6928MS for plastic alternative

Clear front indicator lens in plastic, see 37H6928 for glass alternative

Upper L/H amber indicator lens for MK1 tail lamp assembly

Original Lucas L/H red lens for lower stop tail section of MK1 rear lamp

Set of three (3) plated screws in hard-to-find sizes for Mk1 rear lamp lenses. Kit does one lamp

Upper R/H amber indicator lens for MK1 tail lamp assembly

Original Lucas R/H red lens for lower stop tail section of MK1 rear lamp

Stainless steel headlamp ring. Being stainless these rings are a great, long lasting alternative to the original chromed rings that had a tendency to rust. Sold singly

Foam gasket set to fit MK1 tail lamp lenses. Fits left or right hand lamp

Chromed rear number plate lamp housing for MK3 cars onwards. Housing is supplied less lamp inserts (PRC1230A) of which two are required. Gasket for lamp is 13H6010 and is additional also

Rubber headlamp seal. Fits between the headlamp bucket and front guard. Sold singly

Front side and indicator L/H lamp for the Mini Clubman range plus Lotus Elan and Maxi. These are good reproductions as the original base tooling was scrapped by Lucas

Complete with body to lamp seal and lens to lamp seal.

Front side and indicator R/H lamp for the Mini Clubman range plus Lotus Elan and Maxi. These are good reproductions as the original base tooling was scrapped by Lucas

Complete with body to lamp seal and lens to lamp seal.

Plug in headlamp loom with provision for sidelight for use on sealed beam units. Mini clubman models used sealed beams with independant side lamps with an equivalent loom less sidelight bulb which is no longer available. These units can be adapted for use on clubmans. Sold singly

Reproduction chrome metal D-shaped lamp fitted to M1/2 Mini Saloons. Lamp attaches to the hinged license plate holder on the boot lid. See BHA4154 for budget version

Chrome plastic D-shaped lamp fitted to M1/2 Mini Saloons. Lamp attaches to the hinged license plate holder on the boot lid. See BHA4153 for chromed metal version

Courtesy lamp MK4. Complete new unit including lens and festoon bulb. See LB254 for spare bulb

Festoon bulb for interior courtesy light and rear number plate lamps MK3 on. Sold singly

Possibly the smallest light bulb you'll ever see! Fits MK1 stalk mounted turn signal indicator. See 47H5200 for the lens. This bulb is also fits in the illuminated rocker type switches on later Minis (1976-on)

Single filament bulb, used for reverese lamp, rear indicator & front indicator on cars that have park lamp built into that main headlamp. Sold singly

Bulb for rear brake light & front indicator/side lamp, round nose NZ assembled cars. Bulb has a double fillament. Sold singly

Capless bulb for 2/3 gauge instruments. Fits Clubman, Clubman GT, Rover Mini etc. Sold singly

Screw in bulb for dash lamps in most central speedo models. Sold singly

Headlamp adjuster kit for orignal headlamp buckets. Kit contains two adjuster screws, plastic nutserts & pullback spring to fix one headlamp bucket

Bulb holder/lens assembly for rear number plate light housing. Supplied with festoon bulb. Sold singly

H4 halogen headlights with optional pilot light. The chip resistant lenses are convex as per orignal lamps and deliver a wide, flat beam to light up the edge of the road without blinding oncoming traffic. Sold by the pair, includes wiring and sockets for pilot lights and a pair of H4 bulbs

This plastic headlamp bucket kit provides a long lasting solution for replacement of rusty steel buckets. Kit includes chrome inner retaining ring, aim adjusting screws, inner rubber gasket and hardware and bucket. Sold singly

R/H rear tail lamp assembly for MK4 cars. The MK4 lamp is easily identified as it has a reverse lens portion at the bottom. Supplied with lamp to body sealing rubber

L/H rear tail lamp assembly for MK4 cars. The MK4 lamp is easily identified as it has a reverse lens portion at the bottom. Supplied with lamp to body sealing rubber

Foam gasket to fit MK4 on tail lamp lenses. Fits left or right hand lamp. Sold singly

Top R/H portion of MK4 indicator/brake lens

Top L/H portion of MK4 indicator/brake lens

Lower portion of the right tail light lens for MK4 Mini

Lower portion of the left tail light lens for MK4 Mini

Front indicator lamp lens for Mini Clubman. Sold singly

Standard sealed beam headlamp. Basically a bit sealed lightbulb that needs complete replacemet if one of the filaments burns out. See S4698B for halogen upgrade. Sold singly