Interior

Glue in headlining kit for cars 1970 to 1996 in grey.

Kit contains hood cover, C pillar trims and the small sliver of trim that goes between the base of rear windscreen and parcel tray.

Best secured to car body with brush on contact adhesive. ADOS F2 works well.

We can also fit this trim for you if required. Please email or call for more info or to make a booking.

Glue in headlining kit for cars 1970 to 1996 in white.

Kit contains hood cover, C pillar trims and the small sliver of trim that goes between the base of rear windscreen and parcel tray.

Best secured to car body with brush on contact adhesive. ADOS F2 works well.

We can also fit this trim for you if required. Please email or call for more info or to make a booking.

Glue in headlining kit for cars 1970 to 1996 in black.

Kit contains hood cover, C pillar trims and the small sliver of trim that goes between the base of rear windscreen and parcel tray.

Best secured to car body with brush on contact adhesive. ADOS F2 works well.

We can also fit this trim for you if required. Please email or call for more info or to make a booking.

10 piece anodised alloy handle set.

Consists of two of each of the following -

Door openers
Window winders & bezels
Door pulls
Lock catch surrounds

Designed to fit 1985 onwards cars which had an angled door pull handle. Will fit earlier NZ assembled wind up window cars by drilling one addition hole for door pull handle.

Plastic door pocket as fitted to mini metro and minis with wind up window type doors.

4 piece door card set for MK3 onward cars with wind up windows.

Kit contains 2 x door cards and 2 x rear quarter panels.

Each door card is secured to door with 9 x plastic clips. See GFK7509 for clips.

Fitted on wind up window cars up to 1982 approximately when spring type knob on handle was introduced for safety homologation.

Plastic door lock surround fitted to Mk3 1970 on cars with wind up windows.

Plastic interior door pull handle fitted to Mk3 cars until approx 1983.

The chrome boss at either end CZH763 is no longer available new but we do have used from time to time. Drop us a line if you need some.

Plastic door opening handle fitted wind up window cars.

Metal chromed door open handle. As fitted to many MG cars but also fits on minis as a more robust alternative to the standard plastic handle.

Auto retractable front seat belt kit. Sold per seat.

The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type.

Not suitable for MK1/2 saloons and vans/pickups due to large door pockets.

Please read the instructions before fitting or if in doubt call us for fitting tips.

Auto retractable seat belt kit. Sold per seat.

The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type.

Not suitable for MK1/2 saloons and vans/pickups due to large door pockets.

Please read the instructions before fitting or if in doubt call us for fitting tips.

3 point static rear seat belt. Sold per belt.

Please read the instructions before fitting or if in doubt call us for fitting tips.

3 point static front seat belt. Sold per belt.

Please read the instructions before fitting or if in doubt call us for fitting tips.

Steering wheel boss for Mountney steering wheels.

Also fits the following vehicles -

Austin/Morris 1100, 1300 (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Allegro (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Ital (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Marina (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Maestro (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Maxi (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Metro, 111, 114 (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin Mini – Non MPI & Non Air Bag (1978 – 1997) – 48 Splines / ¾” (19mm) Bore Column

Austin/Morris Minor (All Years) – 48 Splines / ¾” (19mm) Bore Column

Austin Healey Sprite – Horn Via Centre Of Wheel (1964 - 1969) – 48 Splines / ¾” (19mm) Bore Column

MG Midget – Horn Via Centre Of Wheel (1964 - 1969) – 48 Splines / ¾” (19mm) Bore Column

MG MGB & GT – Horn Via Centre Of Wheel (Up To 1969) – 48 Splines / ¾” (19mm) Bore Column

MG MGC – Horn Via Centre Of Wheel (Up To 1969) – 48 Splines / ¾” (19mm) Bore Column

MG 1100, 1300 (All Years)

Mountney 13" wood rim dished steering wheel with polished 3 spoke centre design.

See SWABC for boss kit.

Mountney 13" wood rim dished steering wheel with slotted 3 spoke centre design.

High quality with retro riveted wood rim.

See SWABC for boss kit.

Mountney 13" vinyl rim dished steering wheel with polished 3 spoke centre design.

See SWABC for boss kit.

Stainless steel rear view mirror. This mirror is 6" long and will fit any model of Mini EXCEPT FOR TWIN POINT which attach to the special screen itself. Supplied with fixing screws

Magic Wand 850cc rubber shift boot.

The first Minis had a very simple gearchange, the lever exits the transmission directly through the floor. This requires a special boot to accommodate the curves in the floor and tunnel and being rubber it eventually cracks with age and flexing. Replace it with the real thing to keep wet or dry road crud out of the car. See 14A6861 for the metal surround to hold this gaiter in place.

Gear lever gaiter for all remote control type gearboxes with the lever just in front of the seat crossmember with curved top to transmission tunnel.

The metal retainer for this gaiter is 14A9942. These were fitted until the introduction of the rod change gearbox where you lift the lever to engage reverse.

Rod change gear lever boot.

The metal retainer that screws to the floor to hold this gaiter is FJN10003.

Remote gear lever boot retainer for 22A608 boot.

Metal retainer that screws to the floor to hold CZH4278 rod change gear lever boot in place.

This is a used condition retainer that has been media blasted a repainted ready for fitment.

Dash cards for cars with central oval gauge pod and no side air vents.

Made of painted textured card.

Dash cards for cars with central oval gauge pod with side air vent holes.

Made of painted textured card.

Black padded textured vinyl liner for front parcel tray. Suitable for round nose and Clubman models. Trim R/H side to suit for Clubman.

Boot liner as fitted to early MK1 Deluxe and Cooper model Minis.

Made of black textured fiberboard and secured with chrome screws and upholstery washers.

Can be used on an year of mini saloon.

Firewall soundproof as fitted to the early MK1/2 minis with the fresh air vent on driver side.

These OEM style soundproof mats will fit right on any MK1/2 Mini.

Cutouts are there for the fresh air hose, hinges, wiring and wiper motor.

The felt jute on rear is flame resistant.

Firewall soundproof as fitted from MK3.

The felt jute on rear is flame resistant.

Don't let the low cost of this "universal" carpet kit fool you. They are made from good-quality nylon carpet. All pieces are pre-cut for easy installation.

Made with footpads on both sides of front floor section. You will need to cut out gear-lever and steering column holes using your old carpets a template.

This set is black and to finish the job nicely we recommend you use CARPET01 clip set.

Made to fit any saloon they are perfect fit for rod change cars.

On pre 1973 models with the bulge on driver side of transmission tunnel carpet will sit a little proud but is often an acceptable compromise for the price.

MK1 style alloy gear knob in spun alloy.

Will fit any Mini gear lever with standard thread.

MK1 style alloy gear knob.

Will fit any Mini gear lever with standard thread.